# Building components with Maven

To develop new components, Talend Component Kit requires a build tool in which you will import the component project generated from the starter.

You will then be able to install and deploy it to Talend applications. A Talend Component Kit plugin is available for each of the supported build tools.

`talend-component-maven-plugin` helps you write components that match best practices and generate transparently metadata used by Talend Studio.

You can use it as follows:

``````<plugin>
<groupId>org.talend.sdk.component</groupId>
<artifactId>talend-component-maven-plugin</artifactId>
<version>${component.version}</version> </plugin>`````` This plugin is also an extension so you can declare it in your `build/extensions` block as: ``````<extension> <groupId>org.talend.sdk.component</groupId> <artifactId>talend-component-maven-plugin</artifactId> <version>${component.version}</version>
</extension>``````

Used as an extension, the goals detailed in this document will be set up.

## Maven lifecycle

The Talend Component Kit plugin integrates some specific goals within Maven build lifecycle. For example, to compile the project and prepare for deploying your component, run `mvn clean install`. Using this command, the following goals are executed:

The build is split into several phases. The different goals are executed in the order shown above. Talend Component Kit uses default goals from the Maven build lifecycle and adds additional goals to the building and packaging phases.

Goals added to the build by Talend Component Kit are detailed below. The default lifecycle is detailed in Maven documentation.

## Talend Component Kit Maven goals

The Talend Component Kit plugin for Maven integrates several specific goals into Maven build lifecycle.

To run specific goals individually, run the following command from the root of the project, by adapting it with each goal name, parameters and values:

``$mvn talend-component:<name_of_the_goal>[:<execution id>] -D<param_user_property>=<param_value>`` ### Dependencies The first goal is a shortcut for the `maven-dependency-plugin`. It creates the `TALEND-INF/dependencies.txt` file with the `compile` and `runtime` dependencies, allowing the component to use it at runtime: ``````<plugin> <groupId>org.talend.sdk.component</groupId> <artifactId>talend-component-maven-plugin</artifactId> <version>${component.version}</version>
<executions>
<execution>
<id>talend-dependencies</id>
<goals>
<goal>dependencies</goal>
</goals>
</execution>
</executions>
</plugin>``````

### Validating the component programming model

This goal helps you validate the common programming model of the component. To activate it, you can use following execution definition:

``````<plugin>
<groupId>org.talend.sdk.component</groupId>
<artifactId>talend-component-maven-plugin</artifactId>
<version>${component.version}</version> <executions> <execution> <id>talend-component-validate</id> <goals> <goal>validate</goal> </goals> </execution> </executions> </plugin>`````` It is bound to the `process-classes` phase by default. When executed, it performs several validations that can be disabled by setting the corresponding flags to `false` in the `<configuration>` block of the execution: Name Description User property Default validateInternationalization Validates that resource bundles are presents and contain commonly used keys (for example, `_displayName`) `talend.validation.internationalization` true validateModel Ensures that components pass validations of the `ComponentManager` and Talend Component runtime `talend.validation.model` true validateSerializable Ensures that components are `Serializable`. This is a sanity check, the component is not actually serialized here. If you have a doubt, make sure to test it. It also checks that any `@Internationalized` class is valid and has its keys. `talend.validation.serializable` true validateMetadata Ensures that components have an `@Icon` and a `@Version` defined. `talend.validation.metadata` true validateDataStore Ensures that any `@DataStore` defines a `@HealthCheck` and has a unique name. `talend.validation.datastore` true validateDataSet Ensures that any `@DataSet` has a unique name. Also ensures that there is a source instantiable just filling the dataset properties (all others not being required). Finally, the validation checks that each input or output component uses a dataset and that this dataset has a datastore. `talend.validation.dataset` true validateComponent Ensures that the native programming model is respected. You can disable it when using another programming model like Beam. `talend.validation.component` true validateActions Validates action signatures for actions not tolerating dynamic binding (`@HealthCheck`, `@DynamicValues`, and so on). It is recommended to keep it set to `true`. `talend.validation.action` true validateFamily Validates the family by verifying that the package containing the `@Components` has a `@Icon` property defined. `talend.validation.family` true validateDocumentation Ensures that all components and `@Option` properties have a documentation using the `@Documentation` property. `talend.validation.documentation` true validateLayout Ensures that the layout is referencing existing options and properties. `talend.validation.layout` true validateOptionNames Ensures that the option names are compliant with the framework. It is highly recommended and safer to keep it set to `true`. `talend.validation.options` true validateLocalConfiguration Ensures that if any `TALEND-INF/local-configuration.properties` exists then keys start with the family name. true validateOutputConnection ### Generating the component documentation The `asciidoc` goal generates an Asciidoc file documenting your component from the configuration model (`@Option`) and the `@Documentation` property that you can add to options and to the component itself. ``````<plugin> <groupId>org.talend.sdk.component</groupId> <artifactId>talend-component-maven-plugin</artifactId> <version>${component.version}</version>
<executions>
<execution>
<id>talend-component-documentation</id>
<goals>
<goal>asciidoc</goal>
</goals>
</execution>
</executions>
</plugin>``````
Name Description User property Default

level

Level of the root title.

`talend.documentation.level`

2 (`==`)

output

Output folder path. It is recommended to keep it to the default value.

`talend.documentation.output`

`${classes}/TALEND-INF/documentation.adoc` formats Map of the renderings to do. Keys are the format (`pdf` or `html`) and values the output paths. `talend.documentation.formats` - attributes Asciidoctor attributes to use for the rendering when formats is set. `talend.documentation.attributes` - templateEngine Template engine configuration for the rendering. `talend.documentation.templateEngine` - templateDir Template directory for the rendering. `talend.documentation.templateDir` - title Document title. `talend.documentation.title`${project.name}

version

The component version. It defaults to the pom version

`talend.documentation.version`

${project.version} workDir The template directory for the Asciidoctor rendering - if 'formats' is set. `talend.documentation.workdDir`${project.build.directory}/talend-component/workdir

attachDocumentations

Allows to attach (and deploy) the documentations (`.adoc`, and `formats` keys) to the project.

`talend.documentation.attach`

true

htmlAndPdf

If you use the plugin as an extension, you can add this property and set it to `true` in your project to automatically get HTML and PDF renderings of the documentation.

`talend.documentation.htmlAndPdf`

false

To render the generated documentation in HTML or PDF, you can use the Asciidoctor Maven plugin (or Gradle equivalent). You can configure both executions if you want both HTML and PDF renderings.

Make sure to execute the rendering after the documentation generation.

#### HTML rendering

If you prefer a HTML rendering, you can configure the following execution in the asciidoctor plugin. The example below:

1. Generates the components documentation in `target/classes/TALEND-INF/documentation.adoc`.

2. Renders the documentation as an HTML file stored in `target/documentation/documentation.html`.

``````<plugin> (1)
<groupId>org.talend.sdk.component</groupId>
<artifactId>talend-component-maven-plugin</artifactId>
<version>${talend-component-kit.version}</version> <executions> <execution> <id>documentation</id> <phase>prepare-package</phase> <goals> <goal>asciidoc</goal> </goals> </execution> </executions> </plugin> <plugin> (2) <groupId>org.asciidoctor</groupId> <artifactId>asciidoctor-maven-plugin</artifactId> <version>1.5.7</version> <executions> <execution> <id>doc-html</id> <phase>prepare-package</phase> <goals> <goal>process-asciidoc</goal> </goals> <configuration> <sourceDirectory>${project.build.outputDirectory}/TALEND-INF</sourceDirectory>
<outputDirectory>${project.build.directory}/documentation</outputDirectory> <backend>pdf</backend> </configuration> </execution> </executions> <dependencies> <dependency> <groupId>org.asciidoctor</groupId> <artifactId>asciidoctorj-pdf</artifactId> <version>1.5.0-alpha.16</version> </dependency> </dependencies> </plugin>`````` #### Including the documentation into a document If you want to add some more content or a title, you can include the generated document into another document using Asciidoc `include` directive. For example: ``````= Super Components Super Writer :toc: :toclevels: 3 :source-highlighter: prettify :numbered: :icons: font :hide-uri-scheme: :imagesdir: images include::{generated_doc}/documentation.adoc[]`````` To be able to do that, you need to pass the `generated_doc` attribute to the plugin. For example: ``````<plugin> <groupId>org.asciidoctor</groupId> <artifactId>asciidoctor-maven-plugin</artifactId> <version>1.5.7</version> <executions> <execution> <id>doc-html</id> <phase>prepare-package</phase> <goals> <goal>process-asciidoc</goal> </goals> <configuration> <sourceDirectory>${project.basedir}/src/main/asciidoc</sourceDirectory>
<outputDirectory>${project.build.directory}/documentation</outputDirectory> <backend>html5</backend> <attributes> <generated_adoc>${project.build.outputDirectory}/TALEND-INF</generated_adoc>
</attributes>
</configuration>
</execution>
</executions>
</plugin>``````

This is optional but allows to reuse Maven placeholders to pass paths, which can be convenient in an automated build.

You can find more customization options on Asciidoctor website.

### Testing a component web rendering

Testing the rendering of your component configuration into the Studio requires deploying the component in Talend Studio. Refer to the Studio documentation.

In the case where you need to deploy your component into a Cloud (web) environment, you can test its web rendering by using the `web` goal of the plugin:

1. Run the `mvn talend-component:web` command.

2. Open the following URL in a web browser: `localhost:8080`.

3. Select the component form you want to see from the treeview on the left. The selected form is displayed on the right.

Two parameters are available with the plugin:

• `serverPort`, which allows to change the default port (8080) of the embedded server. Its associated user property is `talend.web.port`.

• `serverArguments`, that you can use to pass Meecrowave options to the server. Learn more about that configuration at openwebbeans.apache.org/meecrowave/meecrowave-core/cli.html.

 Make sure to install the artifact before using this command because it reads the component JAR from the local Maven repository.

#### Changing the UI bundle

If you built a custom UI (JS + CSS) bundle and want to test it in the web application, you can configure it in the `pom.xml` file as follows:

``````<configuration>
<uiConfiguration>
<jsLocation>https://cdn.talend.com/myapp.min.js</jsLocation>
<cssLocation>https://cdn.talend.com/myapp.min.css</cssLocation>
</uiConfiguration>
</configuration>``````
 This is an advanced feature designed for expert users. Use it with caution.

## Generating inputs or outputs

 This goal is deprecated and will be removed in a future release.

The Mojo `generate` (Maven plugin goal) of the same plugin also embeds a generator that you can use to bootstrap any input or output component:

``````<plugin>
<groupId>org.talend.sdk.component</groupId>
<artifactId>talend-component-maven-plugin</artifactId>
<version>${talend-component.version}</version> <executions> <execution> (1) <id>generate-input</id> <phase>generate-sources</phase> <goals> <goal>generate</goal> </goals> <configuration> <type>input</type> </configuration> </execution> <execution> (2) <id>generate-output</id> <phase>generate-sources</phase> <goals> <goal>generate</goal> </goals> <configuration> <type>output</type> </configuration> </execution> </executions> </plugin>``````  1 The first execution generates an input (partition mapper and producer). 2 the second execution generates an output (processor). It is intended to be used from the command line (or IDE Maven integration) as follows: ``````$ mvn talend-component:generate \
-Dtalend.generator.type=[input|output] \ (1)
[-Dtalend.generator.classbase=com.test.MyComponent] \ (2)
[-Dtalend.generator.family=my-family] \ (3)
[-Dtalend.generator.pom.encoding=UTF-16] (5)
[-Dtalend.generator.pom.spacing=4] (6)``````
 1 Select the type of component you want: `input` to generate a mapper and an emitter, or `output` to generate an output processor. The type is mandatory. 2 Set the class name base (automatically suffixed by the component type). If not set, the package is guessed and the classname is based on the basedir name. 3 Set the component family to use. If not specified, it defaults to the basedir name and removes "component[s]" from it. for example, `my-component` leads to `my` as family, unless it is explicitly set. 4 Specify if the generator needs to add `component-api` to the POM, if not already there. If you already added it, you can set it to `false` directly in the POM. 5 Specify the encoding of the component. If not specified, it defaults to UTF-8. 6 Specify the tabulation spacing. If not specified, it defaults to 2.

For this command to work, you need to register the plugin as follows:

``````<plugin>
<groupId>org.talend.sdk.component</groupId>
<artifactId>talend-component-maven-plugin</artifactId>
<version>${talend-component.version}</version> </plugin>`````` ### Generating the component archive Component ARchive (`.car`) is the way to bundle a component to share it in the Talend ecosystem. It is a plain Java ARchive (`.jar`) containing a metadata file and a nested Maven repository containing the component and its depenencies. ``mvn talend-component:car`` This command creates a `.car` file in your build directory. This file can be shared on Talend platforms. This command has some optional parameters: Name Description User property Default attach Specifies whether the component should archive should be attached. `talend.car.attach` true classifier The classifier to use if attach is set to true. `talend.car.attach` component metadata Additional custom metadata to bundle in the component archive. - - output Specifies the output path and name of the archive `talend.car.output`${project.build.directory}/${project.build.finalName}.car packaging Specifies the packaging -${project.packaging}

This CAR is executable and exposes the `studio-deploy` command which takes a Talend Studio home path as parameter. When executed, it installs the dependencies into the Studio and registers the component in your instance. For example:

``````# for a studio
java -jar mycomponent.car studio-deploy /path/to/my/studio
or
java -jar mycomponent.car studio-deploy --location /path/to/my/studio

# for a m2 provisioning
java -jar mycomponent.car maven-deploy /path/to/.m2/repository
or
java -jar mycomponent.car maven-deploy --location /path/to/.m2/repository``````

You can also upload the dependencies to your Nexus server using the following command:

``java -jar mycomponent.car deploy-to-nexus --url <nexus url> --repo <repository name> --user <username> --pass <password> --threads <parallel threads number> --dir <temp directory>``

In this command, Nexus URL and repository name are mandatory arguments. All other arguments are optional. If arguments contain spaces or special symbols, you need to quote the whole value of the argument. For example:

``--pass "Y0u will \ not G4iess i' ^"``

### Deploying to the Studio

The `deploy-in-studio` goal deploys the current component module into a local Talend Studio instance.

Table 1. Parameters
Name Description User property Default

studioHome

Path to the Studio home directory

`talend.component.studioHome`

-

You can use the following command from the root folder of your project:

``\$ mvn talend-component:deploy-in-studio -Dtalend.component.studioHome="<studio_path>"``

### Help

The `help` goal displays help information on `talend-component-maven-plugin`. Call `mvn talend-component:help -Ddetail=true -Dgoal=<goal-name>` to display the parameter details of a specific goal.

Table 2. Parameters
Name Description User property Default

detail

Displays all settable properties for each goal.

`detail`

false

goal

The name of the goal for which to show help. If unspecified, all goals are displayed.

`goal`

-

indentSize

Number of spaces per indentation level. This integer should be positive.

`indentSize`

2

lineLength

Maximum length of a display line. This integer should be positive.

`lineLength`

80

Scroll to top